Machines - Janome - Presser Feet - 9mm Feet

Janome Satin Stitch Foot F (9mm)

MSRP:

Was:

Now: $4.25
Janome Convertible Free Motion Quilting Set

MSRP:

Was:

Now: $20.99
Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed

MSRP:

Was:

Now: $19.99
Janome Acufeed Ditch Quilting Foot for 9mm Machines

MSRP:

Was: $42.60

Now: $36.99
Janome HP Professional Grade Foot for 9mm Machines

MSRP:

Was:

Now: $8.99
Janome Additional Spool Pin Square Base

MSRP:

Was:

Now: $1.99
Janome Clear View 1/4" Foot for 9mm Machines

MSRP:

Was: $21.90

Now: $18.99
Janome Open Toe Satin Stitch Foot for 9mm Machines

MSRP:

Was:

Now: $8.99
Janome 1/4" Foot for 9mm Machines

MSRP:

Was:

Now: $6.99
Janome 9mm Even Feed Foot

MSRP:

Was:

Now: $26.99
Janome Convertible Even Feed Foot High Shank

MSRP:

Was:

Now: $62.99
Janome Dual Feed Holder (Wide) for 9mm Machines

MSRP:

Was:

Now: $34.99
Janome AcuFeed Foot With Foot Holder (Single) for 9mm Machines

MSRP:

Was: $61.00

Now: $52.99
Janome Snap On Presser Foot holder for 9mm Machines

MSRP:

Was:

Now: $9.99
Janome Ditch Quilting Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Accufeed Flex Professional Grade Foot HP2

MSRP:

Was: $61.00

Now: $52.99
Janome ¼ Inch Foot without Guide for 9mm Machines

MSRP:

Was:

Now: $26.99
Janome Gathering Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Horizon Memory Craft 9400 QCP Upgrade Kit

MSRP:

Was:

Now: $166.99
Janome AcuFeed Long Quilting Guide Bar Left And Right Set

MSRP:

Was:

Now: $18.99
Janome Applique Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Zipper Foot E Fits 9mm Machines

MSRP:

Was:

Now: $4.99
Janome High Shank Ruler Work Foot (QR)

MSRP:

Was:

Now: $41.99
Janome Piping Foot for 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Special Spool Holder for Horizontal Spool Stand

MSRP:

Was:

Now: $9.99
Janome Edge Stitch Foot For 9mm Machines

MSRP:

Was:

Now: $31.99
Janome Ultraglide Foot For 9mm Machines

MSRP:

Was:

Now: $23.99
Janome 1/4" Ruler foot for High-Shank Horizontal Rotary Hook Models (9 mm and 7mm width)

MSRP:

Was:

Now: $68.99
Janome Embroidery Foot P fits 9mm Machines

MSRP:

Was:

Now: $10.99
Janome Overedge Foot M for 9mm Machines

MSRP:

Was:

Now: $10.99
Janome Seam Ripper

MSRP:

Was:

Now: $5.99
Janome 1/4" Seam Foot for Janome 1600P Series Machines

MSRP:

Was:

Now: $18.99
Embroidery Foot P for Janome MC9900 & Elna EL860 eXpressive

MSRP:

Was:

Now: $4.99
Janome Concealed Zipper Foot For 9mm Machines

MSRP:

Was:

Now: $36.99
Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines

MSRP:

Was: $48.30

Now: $41.99
Janome Border Guide Foot for 9mm Machines

MSRP:

Was:

Now: $23.99
Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models

MSRP:

Was:

Now: $104.99
Janome Acufeed Zipper Foot Single for 9mm Acufeed Machines

MSRP:

Was:

Now: $17.99
Janome Accufeed Standard Dual Feed Foot For MC6600 & MC7700

MSRP:

Was:

Now: $31.99
Janome Convertible Free Motion Quilting Foot Set

MSRP:

Was:

Now: $62.99

Janome Satin Stitch Foot F (9mm)

Genuine Janome Sewing Satin Stitch Foot F (9mm) For sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or sating stitches. Foot is made of clear plastic making it easier to view...

MSRP:

Was:

Now: $4.25
Janome Convertible Free Motion Quilting Set

Quilting with rulers and templates is a great way to achieve perfect patterns every time. The Ruler Foot attachment to the Convertible Free Motion Quilting Foot Set fits perfetly next to rulers and templates to achieve great results. This set...

MSRP:

Was:

Now: $20.99
Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed

Janome Acufeed 1/4" Seam Foot for 9mm Machines with Acufeed A popular foot with patchworkers for that essential 1/4" seam. The guide on the foot enables you to sew a perfect 1/4" seam every time while the AcuFeed system guides your fabric...

MSRP:

Was:

Now: $19.99
Janome Acufeed Ditch Quilting Foot for 9mm Machines

Janome Acufeed Ditch Quilting Foot for 9mm Machines This foot combines AcuFeed's perfect feeding with a guide allowing you to stitch neatly in the ditch. It is also ideal for top stitching. Keeps both decorative and strait stitches in the...

MSRP:

Was: $42.60

Now: $36.99
Janome HP Professional Grade Foot for 9mm Machines

Janome HP Professional Grade Foot for 9mm Machines A combination of a slim foot and a ¼ inch foot that mimics what you would find on industrial sewing machines. The foot’s compactness makes it especially suitable for curve sewing...

MSRP:

Was:

Now: $8.99
Janome Additional Spool Pin Square Base

The Janome Additional Spool Pin Square Base is used when sewing with double needle or winding a bobbin. Use with Janome models: 2040, 3022, 3160QDC, 4045LX, 4045NX, 4048/8048/HF8048, 4119 (Quilter's Delight), 4618LE, 4623LE, 509, 521, 525S,...

MSRP:

Was:

Now: $1.99
Janome Clear View 1/4" Foot for 9mm Machines

Janome Clear View 1/4" Foot for 9mm Machines For the most control over your fabric while piecing, most quilters prefer to use the Straight Stitch Needle Plate. This foot works specifically with that plate to achieve a perfect 1/4" seam in...

MSRP:

Was: $21.90

Now: $18.99
Janome Open Toe Satin Stitch Foot for 9mm Machines

Janome Open Toe Satin Stitch Foot for 9mm Machines The open toe on this foot allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique, and cut work. It is sometimes referred to as the Custom...

MSRP:

Was:

Now: $8.99
Janome 1/4" Foot for 9mm Machines

Janome 1/4" Foot for 9mm Machines A popular foot with patchworkers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4 inch seam is called for but the...

MSRP:

Was:

Now: $6.99
Janome 9mm Even Feed Foot

Janome 9mm Even Feed Foot for S5 and MC6650 The Even Feed Foot, sometimes referred to as the walking foot, is designed with a set of feed dogs which allow the fabric to feed without shirting and eliminates the problem of the under layer of...

MSRP:

Was:

Now: $26.99
Janome Convertible Even Feed Foot High Shank

Janome's Convertible Even Feed Foot Set offers convenient features especially for quilters. The set includes everything you need for gorgeous quilting. The new construction of these feet make it easier than ever to set up for all kinds of...

MSRP:

Was:

Now: $62.99
Janome Dual Feed Holder (Wide) for 9mm Machines

Janome Dual Feed Holder (Wide) for 9mm Machines The Janome Dual Feed Holder (Wide) for 9mm Machines is the original part that came with your machine. The AcuFeed Flex system allows you to sew through many layers of fabric very easily without...

MSRP:

Was:

Now: $34.99
Janome AcuFeed Foot With Foot Holder (Single) for 9mm Machines

Janome AcuFlex Holder and Foot (Single) for 9mm Machines Now there is an AcuFeed Flex system for your more narrow projects! Sometimes, the standard AcuFeed Flex twin system is just a little too bulky for very fine work. In these cases, you can...

MSRP:

Was: $61.00

Now: $52.99
Janome Snap On Presser Foot holder for 9mm Machines

Janome Snap On Presser Foot holder for 9mm Machines This is the snap on shank or presser foot holder that originally came on your machine listed below. For use with 9mm machines including the Janome MC15000, MC14000, MC12000, MC9900, MC8200, MC8900,...

MSRP:

Was:

Now: $9.99
Janome Ditch Quilting Foot For 9mm Machines

Janome Ditch Quilting Foot For 9mm Machines A very useful addition to the sewing room when wanting a perfectly straight "stitch in the ditch". The guide on the foot spreads the seams allowing you to stitch perfectly in the ditch, and is also...

MSRP:

Was:

Now: $23.99
Janome Accufeed Flex Professional Grade Foot HP2

The Janome Accufeed Flex Professional Grade Foot HP2 Provides professional design and feed performance! For models compatible with Professional Grade Needle Place (HP) Professional Design: Great for curves and precise topstitching due to...

MSRP:

Was: $61.00

Now: $52.99
Janome ¼ Inch Foot without Guide for 9mm Machines

Janome ¼ Inch Foot without Guide for 9mm Machines Seasoned quilters prefer to use a 1/4" seam foot without the assistance of guide to avoid catching on the seam allowance. There is even a 1/4" guide line on the left side of the needle...

MSRP:

Was:

Now: $26.99
Janome Gathering Foot For 9mm Machines

Janome Gathering Foot For 9mm Machines With the Gathering Foot it's easy to create the gather you want. The bottom fabric is gathered, seamed and overcast to a flat top fabric all in one easy operation. For use with: Horizon Memory Craft...

MSRP:

Was:

Now: $23.99
Janome Horizon Memory Craft 9400 QCP Upgrade Kit

Janome Horizon Memory Craft 9400 QCP Upgrade Kit - Does not include sewing machine The Janome Horizon Memory Craft 9400 QCP Upgrade Kit contains a machine upgrade that unlocks Ruler Work capabilities and four new presser feet. The ruler foot upgrade kit...

MSRP:

Was:

Now: $166.99
Janome AcuFeed Long Quilting Guide Bar Left And Right Set

Janome AcuFeed Long Quilting Guide Bar Left And Right Set Don't waste time drawing straight lines on your quilt top! The Long Quilting Guide Bar is used to keep lines of quilting straight. The new extra-long format allows spacing up to 4 1/4". The set...

MSRP:

Was:

Now: $18.99
Janome Applique Foot For 9mm Machines

Janome Applique Foot For 9mm Machines When doing applique we often use the standard satin stitch foot or, more recently, the open toe satin stitch foot for greater visibility. However, Janome also has a dedicated "Applique Foot" in its range of...

MSRP:

Was:

Now: $23.99
Janome Zipper Foot E Fits 9mm Machines

Janome Zipper Foot E Fits 9mm Machines This foot can be set to sew on each side of the zipper. Also great for sewing close to piping. This is the standard zipper foot that originally comes with each of the machines listed below. For use...

MSRP:

Was:

Now: $4.99
Janome High Shank Ruler Work Foot (QR)

Janome High Shank Ruler Work Foot (QR) To make ruler work more enjoyable for all quilters, the Ruler Work foot (QR) was developed. Regular patterns that are difficult to free-motion quilt can be sewn using the Ruler Work foot and a quilting...

MSRP:

Was:

Now: $41.99
Janome Piping Foot for 9mm Machines

Janome Piping Foot for 9mm Machines Used for attaching piping cord. Its the exact same foot the professionals use when adding fancy piping to your cushions or 3-piece suite. Piping adds the extra finishing touch to home decor projects. This foot...

MSRP:

Was:

Now: $23.99
Janome Special Spool Holder for Horizontal Spool Stand

Sometimes a large spool will not fit on your horizontal spool pin with enough room for the spool holder to attach properly. This Horizontal Spool Holder allows the spool to be held tight to your spool pin without falling off or creating a gap.

MSRP:

Was:

Now: $9.99
Janome Edge Stitch Foot For 9mm Machines

Janome Edge Stitch Foot For 9mm Machines This foot has unique features that allow you to stitch perfectly on the edges of fabrics. You can use it to create a number of decorative trims and hems with perfectly straight lines every time. For use...

MSRP:

Was:

Now: $31.99
Janome Ultraglide Foot For 9mm Machines

Janome Ultraglide Foot For 9mm Machines The ultra glide foot is molded from a special resin allowing easier sewing of fabrics that may otherwise stick to the standard metal foot such as ultra suede, faux leather and plastic. This non-stick foot...

MSRP:

Was:

Now: $23.99
Janome 1/4" Ruler foot for High-Shank Horizontal Rotary Hook Models (9 mm and 7mm width)

Janome 1/4" Ruler foot for High-Shank 9mm and 7mm Designed for use with quilting rulers, this foot has a 1/2 inch outer diameter that allows the needle to drop 1/4 inch from the ruler edge. Compatible with Janome machine...

MSRP:

Was:

Now: $68.99
Janome Embroidery Foot P fits 9mm Machines

Standard foot for professional embroidery on 9mm stitch width machines. Use with: EL900 eXpressive Horizon Memory Craft 12000 Horizon Memory Craft 14000 Horizon Memory Craft 15000 MC 200E MC 350E Memory Craft 400E Memory Craft...

MSRP:

Was:

Now: $10.99
Janome Overedge Foot M for 9mm Machines

Janome Overedge Foot M for 9mm Machines Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The foot guides the fabric and keeps your edges flat by compensating for the lack of friction...

MSRP:

Was:

Now: $10.99
Janome Seam Ripper

The Genuine Janome Sewing Seam Ripper Accessory is a must-have tool for any sewing enthusiast. This high-quality seam ripper is designed specifically for precision ripping, allowing you to easily remove unwanted stitches without damaging your...

MSRP:

Was:

Now: $5.99
Janome 1/4" Seam Foot for Janome 1600P Series Machines

1/4 inch Seam Foot (1600P series) A popular foot with patchworkers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4 inch seam is called for...

MSRP:

Was:

Now: $18.99
Embroidery Foot P for Janome MC9900 & Elna EL860 eXpressive

The Embroidery Foot P fits Janome model MC9900 and Elna model EL860 eXpressive. This is a genuine Janome replacement foot that originally came with the MC9900 and Elna EL860 eXpressive.

MSRP:

Was:

Now: $4.99
Janome Concealed Zipper Foot For 9mm Machines

Janome Concealed Zipper Foot For 9mm Machines Good quality ready-to-wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker which is a pity because they can ensure success every time...

MSRP:

Was:

Now: $36.99
Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines

Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines The Janome AcuFeed Open Toe Satin Stitch Foot for 9mm Machines allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique, and cut work. It...

MSRP:

Was: $48.30

Now: $41.99
Janome Border Guide Foot for 9mm Machines

Janome Border Guide Foot for 9mm Machines Having problems lining up or evenly spacing your border designs? Now the Border Guide Foot helps you to easily match up your border designs with the red lines of the foot. No need to mark every row...

MSRP:

Was:

Now: $23.99
Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models

Janome Convertible Even Feed Foot Set for 9mm Non Acufeed Models The Convertible Even Feed Set is designed with convenient features for the Quilter. The set includes an Even Feed foot with Closed-Toe, Convertible Open-Toe for extra...

MSRP:

Was:

Now: $104.99
Janome Acufeed Zipper Foot Single for 9mm Acufeed Machines

Janome Acufeed Zipper Foot Single for 9mm Acufeed Machines Why would you need to use AcuFeed on a zipper? Well with many layers of fabric making up those seams, sometimes just pinning in place will cause the zipper and fabric to shift while sewing...

MSRP:

Was:

Now: $17.99
Janome Accufeed Standard Dual Feed Foot For MC6600 & MC7700

This replacement Janome Accufeed standard dual feed foot for MC6600 & MC7700 is the foot that originally came on your machine.

MSRP:

Was:

Now: $31.99
Janome Convertible Free Motion Quilting Foot Set

The New Janome Convertible Free Motion Quilting Foot is designed for the serious quilter. It is a streamlined foot for improved visibility. It has reduced vibration and a professional level of durability and has interchangeable feet to maximize its...

MSRP:

Was:

Now: $62.99

Discover a range of Janome 9mm presser feet to enhance your sewing projects. These versatile presser feet are designed to fit Janome machines with a 9mm stitch width and provide precision and control while sewing various fabrics. Whether you are looking for a walking foot for even stitches on multiple layers, a piping foot for adding decorative trim, or a zipper foot for seamless zipper installation, you can find the perfect Janome 9mm feet to meet your sewing needs. Upgrade your sewing experience and achieve professional-looking results with high-quality Janome 9mm presser feet.

If you dont know what kind of Janome you have check the chart here: https://www.janome.com/wp-content/uploads/2024/11/accessory-compability-guide-updated.pdf